|
| SYS-4028GR-TR2
|
-
SuperServer 4028GR-TR2 (Black)
|
|
|
|
|
Super X10DRG-O+-CPU
|
|
|
|
|
| CPU
|
-
Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 160W TDP) *
-
Dual Socket R3 (LGA 2011)
|
| Cores / Cache
|
-
Up to 22 Cores† / Up to 55MB† Cache
|
| System Bus
|
|
| Note
|
† BIOS version 2.0 or above is required
|
| Note
|
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
|
|
|
|
|
| Memory Capacity
|
-
24x 288-pin DDR4 DIMM slots
-
Up to 3TB† ECC 3DS LRDIMM, 1.5TB ECC RDIMM
|
| Memory Type
|
-
2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
|
| DIMM Sizes
|
-
RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
-
LRDIMM: 64GB, 32GB
-
3DS LRDIMM: 128GB
|
| Memory Voltage
|
|
| Error Detection
|
-
Corrects single-bit errors
|
|
|
|
|
| Chipset
|
|
| SATA
|
-
SATA3 (6Gbps) with RAID 0, 1, 5, 10
|
| IPMI
|
-
Support for Intelligent Platform Management Interface v.2.0
-
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
-
ASPEED AST2400 BMC
|
| Network Controllers
|
-
Dual Gigabit Ethernet Ports with Intel® i350
-
Virtual Machine Device Queues reduce I/O overhead
-
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| Graphics
|
|
|
|
|
|
| SATA
|
|
| LAN
|
-
2 RJ45 Gigabit Ethernet LAN ports
-
1 RJ45 Dedicated IPMI LAN port
|
| USB
|
|
| Video
|
|
| Serial Port
|
|
|
|
|
|
| BIOS Type
|
-
128Mb SPI Flash EEPROM with AMI® BIOS
|
| BIOS Features
|
-
Plug and Play (PnP)
-
APM 1.2
-
DMI 2.3
-
PCI 2.3
-
ACPI 1.0 / 2.0 / 3.0
-
USB Keyboard support
-
SMBIOS 2.7.1
-
UEFI
|
|
|
|
|
|
|
| Form Factor
|
-
4U Rackmountable
-
Rackmount Kit (MCP-290-00057-0N)
|
| Model
|
|
|
|
|
|
| Height
|
|
| Width
|
|
| Depth
|
|
| Weight
|
-
Net Weight: 65.5 lbs (29.7 kg)
-
Gross Weight: 100 lbs (45.3 kg)
|
| Available Colors
|
|
|
|
|
|
| Hot-swap
|
-
24 Hot-swap 2.5" hard drive bays
|
|
|
|
|
| PCI-Express
|
-
11 PCI-E 3.0 x16 (FH, FL) slots
-
1 PCI-E 3.0 x8 (in x16) slots
-
Single Root Complex
|
|
|
|
|
|
SAS/SATA HDD Backplane
|
|
|
|
|
| Fans
|
-
8 Hot-swap 92mm cooling fans
|
| Shrouds
|
-
1 Air Shroud (MCP-310-41808-0B)
|
|
|
|
2000W Redundant Power Supplies with PMBus
|
| Total Output Power
|
|
Dimension
(W x H x L)
|
|
| Input
|
-
100-120Vac / 12.5-9.5A / 50-60Hz
-
200-220Vac / 10-9.5A / 50-60Hz
-
220-230Vac / 10-9.8A / 50-60Hz
-
230-240Vac / 10-9.8A / 50-60Hz
-
200-240Vac / 11.8-9.8A / 50-60Hz (UL/cUL only)
|
| +12V
|
-
Max: 83.3A / Min: 0A (100-120Vac)
-
Max: 150A / Min: 0A (200-220Vac)
-
Max: 165A / Min: 0A (220-230Vac)
-
Max: 166.7A / Min: 0A (230-240Vac)
-
Max: 166.7A / Min: 0A (200-240Vac) (UL/cUL only)
|
| 12Vsb
|
|
| Output Type
|
-
25 Pairs Gold Finger Connector
|
| Certification
|
  UL/cUL/CB/BSMI/CE/CCC
Titanium Level
[ Test Report ]
|
|
|
|
|
| CPU
|
-
Monitors for CPU Cores, +1.2V, 1.5V, +3.3V, +12V, (+3V, 1.0V, 1.2V, 1.8V, 1.1V) Standby, VBAT, Memory, Chipset Voltages.
-
4-Phase-switching voltage regulator with auto-sense from 0.6V-1.35V
|
| FAN
|
-
4-pin fan headers with tachometer status monitoring
-
Low noise fan speed control mode
|
| Temperature
|
-
Monitoring for CPU and system environment
-
Thermal Control for 8 fan connectors
|
| Other Features
|
-
Chassis intrusion detection
|
|
|
|
|
RoHS
|
|
| Environmental Spec.
|
-
Operating Temperature:
10°C to 35°C (50°F to 95°F)
-
Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
-
Operating Relative Humidity:
8% to 90% (non-condensing)
-
Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
