|
MBD-X11DPL-i
|
|
|
|
Form Factor
|
|
Dimensions
|
-
12.076" x 10.15" (30.67cm x 25.78cm)
|
|
|
CPU
|
-
Intel® Xeon® Scalable Processors.
-
Dual Socket P (LGA 3647) supported, CPU TDP support Up to 140W, 2 UPI up to 10.4 GT/s
|
|
|
Memory Capacity
|
-
Up to 512GB Registered ECC RDIMM, DDR4-2666MHz; Up to 1TB Registered ECC LRDIMM, in 8 DIMM slots
|
Memory Type
|
-
2666/2400/2133MHz ECC DDR4 RDIMM, LRDIMM
|
DIMM Sizes
|
-
RDIMM: 64GB
-
LRDIMM: 128GB
-
3DS LRDIMM: 128GB
|
Memory Voltage
|
|
Error Detection
|
-
Corrects single-bit errors
|
|
|
Chipset
|
|
SATA
|
-
Intel® C621 controller for 10 SATA3 (6 Gbps) ports; RAID 0,1,5,10
|
IPMI
|
|
Network Controllers
|
-
Dual LAN with Lewisburg
Marvell 88E1512 PHY
|
Graphics
|
|
|
|
SATA
|
|
LAN
|
-
2 RJ45 Gigabit Ethernet LAN ports
|
USB
|
-
4 USB 2.0 ports (2 rear + 2 headers),
-
3 USB 3.0 ports (2 headers + 1 Type A)
|
Video Output
|
|
Serial Port / Header
|
|
TPM
|
|
|
|
|
PCI-E
|
-
2 PCI-E 3.0 x16,
-
3 PCI-E 3.0 x8,
-
1 PCI-E 3.0 x4 (in x8 slot)
|
M.2
|
-
M.2 Interface: SATA/PCI-E 3.0 x4
-
Form Factor: 2260, 2280
|
|
|
BIOS Type
|
|
|
|
Software
|
-
Intel® Node Manager, IPMI2.0, KVM with dedicated LAN, NMI, SPM, SSM, SUM, SuperDoctor® 5, Watchdog
|
Power Configurations
|
|
|
|
Voltage
|
-
+12V, +3.3V, +5V, +5V standby, 3.3V standby, 8 -fan status, Chassis intrusion header, Monitors CPU voltages, Supports system management utility
|
FAN
|
-
8x 4-pin fan headers (up to 8 fans), Overheat LED indication, PWM fan speed control
|
Temperature
|
-
CPU thermal trip support, PECI
|
LED
|
-
CPU / System Overheat LED, UID/Remote UID
|
Other Features
|
-
ACPI power management, ATX Power connector, Chassis intrusion detection, Chassis intrusion header, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, Node Manager Support, SDDC, UID
|
|
|
Operating Temperature Range
|
-
10°C - 35°C (50°F - 95°F)
|
Non-Operating Temperature Range
|
-
-40°C - 70°C (-40°F - 158°F)
|
Operating Relative Humidity Range
|
-
8% - 90% (non-condensing)
|
Non-Operating Relative Humidity Range
|
-
5% - 95% (non-condensing)
|
|