We don't have enough memory on the server. We need to install memory to expand the memory. For the installation of the server memory module, some people may choose to ask a professional master to install, but if we can learn how to install it ourselves, is not it more time-saving? Xiaobian will now give you about the server memory installation method!

I. Rackmount server memory module installation
The first thing we need to know is that the installation of the server's memory stick will usually have a numbering sequence, and this numbering sequence is usually a combination of numbers and letters. We just need to install it in order. For a rackmount server, it will have 2 CPUs and a total of 12 RAMs. There will be a number on the memory slot cover. We only have to take a good look at the IDs and insert them into the RAM. Before installation, check whether the memory module is complete and not bent. Then, press the buttons on both sides of the card slot and gently put the memory module in. However, if it is loaded, check if it is loose. If it is normal, install it. All right. However, it should be noted that when we install the memory, the number of memory modules on both sides of the CPU should be the same. If you encounter a single number of memory, it is best to sit on top of cpu1.

II. Blade server memory installation
The blade server and the rack server are installed in the same way. The difference is that the blade server has only 8 slots, so the memory it can expand is also much smaller than that of a rack server. Its installation method is generally, first, first press the buckle, remove the blade, only after we see the round button, hold the button, according to the direction of the arrow, pull the lid above the card slot opened . Similarly, you can see the number of the server on the cover, press the buckle, according to the number of light memory inserted into the slot just fine. No need to move the buckle, he will buckle himself. In this way, the memory of the blade server is also installed.

Three. Precautions when installing
Although it seems that the installation of the server memory is not that complicated, we should also pay attention to it when we install it. First of all, before installation, we must pay attention to check whether the memory is intact, there is no bending, otherwise, it is useless to install the bad memory. Second, pay attention to the installation. Whether it is to open the buckle or press the buckle should be light, do not use too much force, damage the server. Finally, we must remind everyone that after installation, check that the memory module is not loose.

Through the introduction of Xiao Bian, do you think that in fact, it is very simple to install server memory. Afterwards, everyone at home or company can solve these problems on their own. The above is a brief introduction to Xiaobian's installation method for server memory sticks. I hope to help everyone!